Cybergun Smith and Wesson Model 645

Manufacturer: Cybergun

Model: Cybergun Smith and Wesson Model 645

FPS: 240-250

Cost: Not sold independently- Bundled with Cybergun Smith and Wesson M3000 (rebranded DE M47)

Introduction: Cybergun sells an "On-Duty" bundle kit which includes a Smith and Wesson M3000 (simply a rebranded M47), a couple of acessories such as a hoslter, and a spring pistol, the Model 645. While this is simply an add-on to the bundle, the pistol is a simple, yet solid performer.

Externals: The replica is very light, the exception being the magazine. It provides most of the weight for the replica. The red tip is tapered 14mm, but I have yet to find out if this is CCW or CW. It features S&W trades on the grip and relatively poorly etched text on the slide of the pistol. It does not have an open ejection port. Overall, nothing very impressive, and maybe half-decent to look at from a distance.

Metal Parts: There are no metal parts other than screws, the spring and the barrel of the replica. The magazine appears to have a metal weight inside.

Safety: The pistol uses the slide lock as a safety, making it less realistic. The safety feels flimsy and may fail if the trigger is pulled hard-enough. Thus, the safety is relatively disaappointing.

Magazine: The magazine is all plastic but has a great heft due to the weight inside. It is the most solid part of the whole replica. It holds about 15 bbs.

Firing: To fire the KWC Sig Sauer P226, simply pull back the slide till you hear and click and carefully allow the slide to return to its original position. The trigger pull is very light and feels sloppy. The actual performance of the gun is actually suprisingly decent, with it able to easily reach distances of 80 ft with .12 gram bbs. The FPS at these ranges is about 240 FPS. .20 gram bbs are not recommended as range drops heavily when using heavier weight ammo.

Conclusion: Although the Cybergun S&W Model 645 is not sold individually and only in the bundle, it is a solid addition to the package and though simple and has slightly sub-par performance, it is built solidly and it's simple operation means it will last a long time. A series of stress tests over a long period of time show that this replica has the ability to perform for a long time if handled properly. It probably won't survive a drop, but will survive normal wear and tear for a long time. Ultimately, it is great for plinking and maybe a light hearted springer skirmish, but definitely falls short of being a side-arm or going against AEGs.

Airsoft Springers Reviews:
Externals: 2/5
Durability: 3/5
Accuracy: 3/5
Range: 3/5
Power: 3/5
Overall: 3/5

KWC Sig Sauer P226

Manufacturer: KWC

Model: KWC Sig Sauer P226

FPS: 240-250

Cost: $20-$25

Introduction: The KWC Sig Sauer P226 was formerly a popular and common spring pistol replica found at both airsoft hobby shops and sporting good stores. It has now been discontinued and has been succeeded by the HPA series of the Sig Sauer P226.

Externals: The replica comes in two different colors: Black and Clear. There is no open ejection port, instead the P226 features a one-piece slide. The whole replica is built of solid plastic. The replica feels very solid and good to hold. It is extremely durable. The slide features Sig Sauer trademarks.

Metal Parts: There are no metal parts other than screws, the spring and the barrel of the replica.

Safety: The pistol features a realistic safety which is relatively unique to this series of pistol. It is very solid and slides back and forth well, but does not click. All in all, it is a functional, effective, and sturdy safety.

Magazine: The magazines are all plastic and feel solid. They are able to take a drop from about 2 feet and suffer minimal damage. The feature KWC's speed-loading design with spring plunger and cap that is often the source of criticism and praise depending in its use. You pull down the plunger and hold the cap to allow bbs to flow in. When finished, simply click the button and the pluger releases, holding the bbs in the magazine. Be careful not to touch the cap otherwise bbs will come shooting out of the magazine. This makes magazine transport a bit more tricky and difficult. The magazines fit into the gun easily with a clear click and feature a bit of wobble.

Firing: To fire the KWC Sig Sauer P226, simply pull back the slide till you hear and click and carefully allow the slide to return to its original position. The trigger requires a bit of pull but very little effort. The range is very nice for a spring pistol, reaching distances of 60-70 feet easily. Alas, the FPS is rather low despite this range.

Conclusion: The KWC Sig Sauer P226 is an excellent replica for beginners and with some potential to serve as sidearms for AEGs. It's durablity and ease of use are what make it stand out as a solid spring replica. Ultimately, I have owned this model and actually left it submereged in water and mud for several weeks on accident. Upon rediscovering my replica, after a quick wash, I found the pistol to still be in working condition! All in all, a great pistol, and it is a shame it has been discontinued! While I believe that the HPA version should be an improvement (uses the same magazines and same looks), I cannot say personally for I have not used it and do not know if the higher price-tag is worth it for the upgraded model.

Airsoft Springers Reviews:
Externals: 3/5
Durability: 5/5
Accuracy: 4/5
Range: 4/5
Power: 3/5
Overall: 4/5

Cybergun Desert Eagle .44

Manufacturer: UHC (Cybergun Rebrand)

Model: Cybergun Desert Eagle .44

FPS: 250-270

Cost: $20-$25

Introduction: The Cybergun Desert Eagle is one of the only two options availible when wanting to purchase a spring Desert Eagle replica (The other would be the KWC Ultra Grade Desert Eagle .50) In any case, it is very common at a variety of sporting good stores and comes with a relatively cheap price tag. The popularity of the Desert Eagle style replica makes it a very common beginner's choice in airsoft replicas.

Externals: The replica comes in three different colors: Silver, Black, and Clear. In all cases, the externals are deftinately not impressive as the silver is a very flat silver, the black is a semi-shiny black, and the clear is obviously transparent. The replica is prone to scratching. Although the replica feels very sturdy in its build, it is very light and feels very plasticy; its size is very deceptive. Since this is a Cybergun rebrand, Desert Eagle trademarks are featured on the replica. Taking away from the realism though are the "Cybergun" and "Shoot/Safe" etchings on the side of the replica. Overall, the externals leave much to be desired despite a sturdy build.

Metal Parts: There are no metal parts other than screws, the spring, the barrel, and other various internal mechanisms of the replica.

Safety: The pistol does not feature a reaslitic safety; rather, it uses the slide lock as a safety. It is a little bit stiff but otherwise, clicks nicely into place. (See note in externals about "Shoot/Safe" etchings)

Magazine: The magazines feel very solid and tend to hold around 20-25 bbs. The last couple of bbs are hard to get into the magazine. The magazine has good weight and is where the majority of the weight in the replica comes from. The mag release is quite solid, except that the magazine does not slide out smoothly the majority of the time; it must be pulled out with some force.

Firing: To fire the Cybergun Desert Eagle, pull the back of the replica till you hear a click. Afterwards, simply pull the trigger. The trigger pull is solid and responds quite well. Ultimately, the range is probably around 50-70 ft accurate with .20s, and probably pushing 75 ft with .12s. Either way, its range is acceptable. The FPS is also decent at 250-270. Overall, its performance is acceptable for such a low cost replica, but still can't compare with potentially less expensive KWC Cybergun-rebranded spring replica pistols.

Conclusion: A fine pistol and a good purchase for those a fan of big handguns and/or the general Desert Eagle style. Unfortunately, the externals and the fake safety are what really make this replica medicore, but it is still a great starting point for beginners because of its easy maitence and sturdy build. I have seen it take several drops onto hard surfaces from 3 feet off the ground and it still holds its own pretty well. In the end, a good deal for its price and great for beginners.

Airsoft Springers Reviews:
Externals: 3/5
Durability: 4/5
Accuracy: 4/5
Range: 3/5
Power: 4/5
Overall: 3.5/5

Cybergun DPMS M16

Manufacturer: Cybergun

Model: DPMS M16

FPS: 280

Cost: $50-$70

Introduction: The Cybergun DPMS M16 is a common M16 spring replica availible on the market. The main significant factor is its inclusion of Panther Arms Trades. They are commonly availible at sporting goods stores.

Externals: The DPMS M16's externals feel very plasticy. The replica is very light despite its big size. It also feels relatively fragile. The Panther Arms trademarks are one of the few highlights of this gun's externals. Overall, the externals are not impressive and are slightly disappointing.

Metal Parts: There are no metal parts on this replica other than the screws and inner barrel.

Features: There are no RIS rails included on this replica. It is a relatively simple airsoft spring replica. The carry handle cannot be removed.

Safety: The safety is a typical M16-style fire selector. Notice that "semi" and "auto" selectors are both to fire. It works well and is relatively easy to operate, although cheap feeling.

Magazine: The magazine itself requires a special loading tool to load the rifle. It holds around 30 rounds. It is quite plasticy as well and has a decent weight.

Firing: To fire the rifle, simply pull back the cocking bolt on the back of the rifle behind the carry handle. The cocking bolt feels plasticy, weak, and flimsy, though usable. Then simply give a decent trigger pull and the replica will fire. The iron sights are simple as well, with the two different iron sights to switch between. The iron sights work well, and they can be used with a paintball mask (though with some difficulty).

Accuracy: Relatively accurate up to 100 feet. There is nothing spectucular about the performance of this replica.

Conclusion: An okay beginner's rifle that should only be purchased if no other options are availible. While not at the lower end of the spectrum, it is very medicore. The main deteriments are its fragile and plasticy feel, which make it very light and unbalanced to fire. The Panther Arms Trades are a cool addition though. Overall, it is simply a beginner's rifle and should be purchased if no better alternatives are availble.

Airsoft Springer Reviews:
Externals: 2/5
Durability: 3/5
Accuracy: 4/5
Range: 3/5
Power: 3/5
Overall: 3/5

Cybergun FAMAS SV Review

Manufacturer: Cybergun

Model: FAMAS SV

FPS: 280-290

Cost: $30

Introduction: The Cybergun FAMAS SV is a commonly referenced beginner's spring replica. Commonly availible at various airsoft stores and sporting good stores, it is unique in that it is one of the only spring bullpup rifles.

Externals: The Cybergun FAMAS has all ABS plastic externals that are relatively well-built. There is no creaking in the rifle. The majority of the weight is in the butt of the stock, typical of many spring rifles. The front external barrel can be screwed off, making the replica length shorter. The plastic is semi-shiny, and is relatively resistant to scratching and such.

Metal Parts: There are no metal parts on this replica other than the screws and inner barrel.

Features: There are two RIS rails- one on the carry handle and a smaller one under the front of the reciever. Note that the RIS on the bottom of the replica is relatively ineffective in that very few acessories are able to attach to it. Both are removable. Also, the bullet ejection shield/cheek rest can be removed and switched to both sides of the replica.

Safety: The safety is extremely simple and is a small lever that twists in the way of the trigger to prevent it from firing. It is ambidextrious.

Magazine: The magazine itself is relatively simple, holding up to around 30 bbs and is easy to load with the included loading tool or speedloader. The magwell itself is also simple, but the mag release lever seems particularily weak (though with proper usage, it should hold up just fine).

Firing: To fire the rifle, simply pull back the cocking bolt on the top of the rifle till you here a click. Be careful not to let the bolt slam forward or it will put unnecessary strain on the front of the rifle. After than, a firm trigger pull is all that is needed to fire the replica. The iron sights on this replica are extremely effective. Note that the iron sights are unusable if you wear a paintball helmet/mask as your facial protective gear.

Accuracy: Very accurate up to 100-110 feet with .20s. Essentially, it is very accurate within its range.

Conclusion: An excellent beginner's replica or simply a good replica to plink around with. The easy to operate bolt makes it able to fire rapidly and accurately. It will be very effective in any spring-replica skirmishes. You definately get your money's worth and more when you purchase this replica. It is very reliable and should last its owner several years of shooting with proper maitence.

Airsoft Springer Reviews:
Externals: 4/5
Durability: 4/5
Accuracy: 4/5
Range: 4/5
Power: 3/5
Overall: 4/5